JR-CHEZHIBAO Automotive Parts Radiator Cap For Racing Car
The working principle of:
When the water temperature of the engine is high, the pump water is
repeatedly pumped to reduce the temperature of the engine. (the
water tank is formed by a hollow copper tube.High temperature into
the tank through air cooling and water cycle to achieve the purpose
of protecting the engine engine cylinder wall), if the water
temperature is too low in winter, this time will stop the water
cycle, to avoid the engine temperature is too low.
The cooling system functions as an extra, useless heat from the
engine that is released from the engine, allowing the engine to
operate at a normal temperature at various rates or driving
The water tank is the heat exchanger of the water cooled engine,
and the normal operating temperature of the engine is maintained by
air convection cooling.Once the tank engine cooling water by high
temperature boiling and vaporizing expansion, pressure exceeds the
set value, by the tank cover (A) the overflow pressure, resulting
in A decrease of cooling water pipe burst and prevent the cooling
system.You should pay attention to whether the temperature gauge of
the engine cooling water on the dashboard is normal.Other such as
engine cooling fan fault caused by the engine cooling water
temperature rise or pipeline leak could also reduce cooling water
of the cooling system, please refer to the cooling water before
adding distilled water to reduce the amount of and cycle is normal.
There is three model at the picture,when you make an order,please
leave message to us,what bar you need?if there is no message under
the order,we will send any model what in stock
1.It is not only to prevent water leakage in the water tank, but
the larger role is to adjust the pressure balance of the water tank
to maintain the water level balance of the water tank.
2.Change the d1-spec temperature safe water tank cover, which can
let you know the accurate water tank temperature without engine.
Silica gel material inner plug - increases heat resistance
temperature and increases the closeness of the lid of the water
Extremely High Quality aluminum Radiator cap.Its design is very
sporty and has been received a good.
|Name :JR Radiator Cap||Brand:JR|
|MOQ:5 Piece||Place Of Origin:China|
- Brand Name:JR
- Item Type:Tank Covers
- Model Name:Thermo Radiator Cap
- Item Weight:0.28kg
- Item Height:15inch
- Material Type:aluminum
- Model Year:2015
- Item Length:5inch
- Special Features:Thermo Radiator Cap
- External Testing Certification:ISO9000
- Item Width:8inch
- Country of origin:china guangzhou
- Car Model:universa
1.Positive Feedback is very important to us.if you are satisfied
with our service, please remeber to give a positive feedback.
2.Please contact us before leaving neutral or negative feedback,we
will try our best to solve the problems.
3.If you are not satisfied with our best to solve the
problems,please contanct us before leaving your feedback and we
will resolve the issue immediately.thank you very much.
High quality and Durable
Easy to install,just remove your original one and install the new
IF YOU HAVE ANY QUESTION ,PLEASE CONTACT WITH US:
Tel: 13763398810(Mary Lee)