Racing Car Auto Steering Wheel Steering Wheel Cover PVC
1. Skeleton, usually zinc alloy, or aluminum alloy, some
manufacturers are trying to adopt a cheaper and lighter magnesium
alloy.The skeleton is produced by die casting.A small number of
manufacturers are also using steel sheet metal to make the
skeleton, the structure is complicated.
2. Foaming, foaming material is generated in the foaming machine,
and the skeleton is fixed in the foaming machine during production
Combination of 1 and 2 is the simplest steering wheel.
3. Some of the steering wheels require the skin to be sewn.
4. Some of the steering wheels require wood and use a special
machine to stack the pieces up and down and finally paint them.
5. Some of the steering wood is replaced with fake wood, which is
usually finished with plastic injection molding, such as PP and
ABS, and then watermark
6. The steering wheel will be equipped with the installation buckle
or screw hole corresponding to the main air bag DAB
7. Some require horn contacts on the steering wheel, simpler way is
pressed horn contacts into the skeleton, and one way is to do a
horn contacts module and integrated part of the electrical wiring
harness and circuit board on it
8. Some of the steering wheels require a switch, mainly on either
side of the spoke shell or the main airbag. The function is usually
the radio, plus deceleration, cruise, sound, answering the phone,
etc.The steering wheel not only provides the installation card
button, but also provides the wiring harness interface.
9. Under the steering wheel, there will be a multi-function switch
module, or a paddle shift, when you need to consider electrical
1.Environmental protection, no peculiar smell, choose high quality
environmental protection rubber, reduce the harm of
formaldehyde,Non-slip rubber material, more effectively increased
2.High degree of safety, increase the palm of the hand and the
steering wheel sets the middle of the friction, more non-slip.
3.Breathable perspiration, selection of breathable fabrics, long
driving can also keep the palm fresh and comfortable.
4.High durability, wear resistance, not easy peeling,Operation
performance, so you control more flexible.
5.Beautiful fashion, personalized fashion appearance, not only make
the car more beautiful decoration, but also to protect the steering
|Name: Steering Wheel||Material: PVC and leather|
|Color: Red||Place Of Origin: Guangzhou, China|
|Brand: Sparco||Sale Area: Global|
- Car Maker:
- Material:PVC and Leather
- Condition: Never Used
- Diameter/Thickness: 350mm / 3 inch
- Quantity: 1 PC 350MM deep dish style steering wheel
- Interchange Part Number: Interior - Steering Wheel
- Color: Same as picute show
- Specification: Necessary Wire and Hardware are Included for
- Application: Fit For Most Vehicles With 6-Bolt Hub Adapter
1.Size: 35cm / 14 inches.Concave about 5cm.
2.Composition: PVC, aluminum stand, iron ring and horn.
3.Colorful accessories are more attractive to your car.Reasonable
size, soft touch, new style.According to the concept design of
human-based mechanics, it is easier to control and give you a lot
of fun to drive.Variety of colors.Note: the retrofitting steering
wheel is general, as long as it is equipped with a suitable base to
install any steering wheel!
- High quality and Durable
- Competitive Price
- Adequate Stock
- Fast Delivery
- Convenient Transportation
- Good Service
1. slips onto most steering wheels, increase driving comfort and
improves grip, protect hands against hot and cold extremes
2. fits all the cars, trucks and boats with steering wheels with
3. many material available: PU, PVC material.